The ONLY production widebody kit in the world designed specifically for the 2018+ Mk12 Toyota Corolla.
Increasing the width of the vehicle by 60mm front and rear allows for the ability to run a much larger wheel/tire setup to maximize the performance of this awesome hot hatch.
Estimated wheel/tire specs are 18x10.5J -12ET with 275-35-18R front and rear.
The kit is designed based on the SE/XSE trim package for the 2018+ Toyota Corolla Hatchback and the 2020+ Toyota Corolla Sedan -- Other trims/model years may require parts swap/upgrades to make this kit work.
Each E210R Mk12 Edition widebody kit consists of the following pieces:
1 x Front Splitter (CFRP Optional*)
2 x Front Bumper Extensions
2 x Front Over Fenders (CFRP Vents Optional*)
2 x Side Skirts (CFRP Extensions Optional*)
2 x Rear Door Extensions
2 x Rear Over Fenders
2 x Rear Bumper Extensions
*If CFRP option is selected, specified part(s) and/or certain section(s) of part(s) will be delivered in exposed carbon with UV clearcoat -- the remainder of the part(s) will be delivered in standard FRP (Fiberglass) with gelcoat/primer finish.
**Rear wing, Lip Spoiler and Diffuser (Not Pictured) are also planned to be released for order at a later date.
This product will be a LIMITED production release of 50 units, meaning each kit will have a serial number attached to it -- Once the final kit is sold we will discontinue this product.
Pre-order pricing is valid until production has begun, then, pricing will increase to regular MSRP.
Scheduled ETA for us to begin delivery of the first kit(s) is August 2022.
By placing your order you agree to allow time needed to produce the design as shown and understand that ETA provided may change depending on manufacturing timelines, production delays, etc.
You are able to contact us and request a refund up until your order is in process by the manufacturer -- if refund is requested after this point we reserve the right to refund the amount paid minus all costs owed to the manufacturer for completing your order.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP- Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP- Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
ORDER SHIPMENT DELAY NOTICE
Due to the effects COVID19 has had on manufacturing supply chains, production and shipping timelines have continued to be DELAYED, thus longer wait times have been enforced upon us affecting our order fulfillment performance.
Our product pages may show fulfillment timelines of 6-8 weeks but this is NOT the case. Please contact us directly for a more accurate timeline on order fulfillment and shipping.
We encourage all of our customers with pending orders or new customers wanting to place orders, to please exercise patience with us during these difficult times as we are doing our best to fulfill all orders as quickly and efficiently as possible.