13 products
MS6R SRT-Style Vented Carbon Fiber Hood for 2006-2007 Mazdaspeed 6
Regular price $1,450.00 USDIntroducing our new race-inspired vented carbon fiber hood for the 2006-2007 Mazdaspeed 6.
Our EXCLUSIVE vented carbon fiber hood has outer vents to help with heat extraction from the engine bay and a center vent to allow additional cooling and heat extraction.
The hood allows installation of the factory ducting for factory or aftermarket top-mount intercooler setups.
Alternatively for front-mount intercooler setups, no modifications should be required for clearance and/or functionality.
The hood also comes with rain guards which can be installed to prevent water from entering the engine bay when venting is not required.
Material of our base hood is CFRP (Carbon Fiberglass Reinforced Polymer) which is clear coated, UV-lacquered version of our product with the entirety of the exterior and interior in Carbon Fiber.
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
MS3R Gen2 Widebody Kit for 2010-2013 Mazdaspeed 3
Regular price $1,950.00 USD Sale price $1,750.00 USD Save $200.00 USDThe only production widebody kit in the world designed specifically for the 2010-2013 Gen2 Mazdaspeed 3.
Each MS3R Gen2 V2 Edition widebody kit consists of the following pieces:
The width of the front and rear of the vehicle is increased by 70mm on each side.
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
MS3R Gen1 Carbon Aero Wing for 2007-2009 Mazdaspeed 3
Regular price $1,250.00 USDIntroducing our new Carbon Aero Wing for the 2007-2009 Mazdaspeed 3.
Each Carbon Aero Wing consists of the following pieces:
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
MZ3R Gen3 Widebody for 2014-2018 Mazda 3
Regular price $2,450.00 USDEnjoy our most exclusive release to date with this widebody kit designed specifically for the 2014-2018 Gen3 Mazda 3.
Increasing the width of each side of the vehicle by 60mm front and rear allows for the ability to run a much larger wheel/tire setup to maximize the performance of this awesome hot hatch.
Each MZ3R Gen3 Edition widebody kit consists of the following pieces:
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
MS6R Widebody Kit for 2006-2007 Mazdaspeed 6
Regular price $2,450.00 USDThe ONLY production widebody kit in the world designed specifically for the 2006-2007 Mazdaspeed 6.
Increasing the width of the vehicle by 60mm each side, front and rear, allows for the ability to run a much larger wheel/tire setup to maximize the performance of this amazing AWD sleeper.
Each MS6R Edition widebody kit consists of the following pieces:
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
RSR Mk3 Carbon Aero Wing for 2015-2018 Ford Focus
Regular price $1,250.00 USDIntroducing our new Carbon Aero Wing for the 2015-2018 Ford Focus.
Each Carbon Aero Wing consists of the following pieces:
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
MS3R Gen1 Widebody Kit for 2007-2009 Mazdaspeed 3
Regular price $1,950.00 USD Sale price $1,750.00 USD Save $200.00 USDElevate your Mazdaspeed 3 to new heights with our MS3R Gen1 Widebody Kit. Designed specifically for the 2007-2009 models, this kit is the epitome of automotive enhancement, merging stunning aesthetics with uncompromising performance.
Join the ranks of automotive enthusiasts who have embraced the unmatched style and performance of our MS3R Gen1 Widebody Kit. Experience the thrill of transforming your Mazdaspeed 3 into a captivating masterpiece that captivates on the road and onlookers in awe.
Unleash your Mazdaspeed 3's true potential with the MS3R Gen1 Widebody Kit. Prepare to redefine automotive excellence and leave an unforgettable impression wherever your journey takes you.
Each MS3R Gen1 Edition widebody kit consists of the following pieces:
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
MZ3R Gen4 Vented Carbon Fiber Hood for 2019+ Mazda 3
Regular price $1,450.00 USD Sale price $1,250.00 USD Save $200.00 USDIntroducing our new vented carbon fiber hood for the 2019+ Mazda 3.
Molded directly from an OEM part, the hood is a lightweight, vented replacement for the heavier, steel hood.
The hood is vented at the front which drastically improves engine by temperatures and extracts heat.
All of our hoods are supplied with appropriate rain guards/covers which can be installed/removed based on customer needs.
Material of our base hood is CFRP (Carbon Fiberglass Reinforced Polymer) which is a clear coated, UV-lacquered version of our product with the entirety of the exterior and interior in Carbon Fiber -- we also offer upgraded "forged" or chopped carbon at an additional cost.
Please note this initial run is LIMITED at the special pre-order price -- Once all spots are filled orders will be closed until the first batch of items is into production.
By placing your order you agree to allow time needed to produce the design as shown and understand that ETA provided may change depending on manufacturing timelines, production delays, etc.
You are able to contact us and request a refund up until your order is in process by the manufacturer -- if refund is requested after this point we reserve the right to refund the amount paid minus all costs owed to the manufacturer for completing your order.
Please read our Terms and Conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
MS6R OE-Style Carbon Fiber Hood for 2006-2007 Mazdaspeed 6
Regular price $1,450.00 USDIntroducing our new OE-style carbon fiber hood for the 2006-2007 Mazdaspeed 6.
Molded directly from an OEM part, the hood is a lightweight replacement for the heavy, steel hood which is prone to rusting.
Material of our base hood is CFRP (Carbon Fiberglass Reinforced Polymer) which is a clear coated, UV-lacquered version of our product with the entirety of the exterior and interior in Carbon Fiber.
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.
MZ3R Gen3 Carbon Aero Wing for 2014-2018 Mazda 3
Regular price $1,250.00 USDIntroducing our new Carbon Aero Wing for the 2014-2018 Mazda 3.
Each Carbon Aero Wing consists of the following pieces:
Please note that products are not typically kept in stock, and are made-to-order. As these products must be manufactured, lead times will vary.
Following your order, we will contact you to explain the order process, and provide an estimated timeframe for delivery.
Following the discussion, should you choose to continue with the order, please note that as the parts will be made for you, there will be no further option for cancellation (if there are any concerns regarding lead time, please advise us immediately during the initial follow-up).
At the time of the initial contact and after being informed of the estimated lead time, should you choose to cancel, you may do so within 1 business day. You are encouraged to read and understand the full terms and conditions before purchasing.
FRP - Fiberglass Reinforced Polymer is unprimed, unpainted version of our product. It is intended to have the entirety of the item professionally finished after a pre-install of the product by means of sanding and other work before paint is applied.
CFRP - Carbon Fiberglass Reinforced Polymer is clear coated, UV-lacquered version of our product with the entirety of the exterior in Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCFRP - Forged Carbon Fiberglass Reinforced Polymer is clear coated, UV lacquered version of our product with the entirety of the exterior in Forged Carbon Fiber with the underside of the item in FRP (Fiberglass Reinforced Polymer). It is intended to direct bolt on these products without any additional paint and/or bodywork.
CF100 - 100% Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
FCF100 - 100% Forged Carbon Fiber is clear coated, UV-lacquered version of our product with the entirety of the part made of Carbon Fiber. It is intended to direct bolt on these products without any additional paint and/or bodywork.
Our products are made using the best production techniques and high-quality materials, allowing for easy prep and excellent fitment.
Professional installation by an experienced aftermarket aerodynamic installer is highly recommended on all products, the level of difficulty for installation varies for each application, and is dependent on the experience of the installer.
Please note, for widebody kits you will typically need to cut front arches; and cut, weld and seal rear quarter panels to properly install the kit to allow wider wheels.
The flares can be attached via silicone/epoxy; or bolted on using proper hardware.